Difference between revisions of "A8000"

From VaxHaven
Jump to navigation Jump to search
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
==ADV11-C Analogue-to-digital convertor==
+
==ADV11-C Analogue-to-digital converter==
 +
 
 +
The ADV11-C is an LSI-11 analog input printed circuit board, a8000. It accepts up to 16 single-ended inputs, or up to 8 differential inputs, either unipolar or bipolar. A unipolar input can range from 0V to 10V. A bipolar input can range from -10V to +10V. The ADV11-C also has a programmable gain on those inputs of 1, 2, 4 or 8 times the input voltage.
 +
 
 +
Analog-to-digital (A/D) conversions are started by a program command, an external trigger, or a real-time clock input. When the program command sets the A/D START bit in the control/status register, the ADV11-C starts the A/D conversion on the input channel selected.
 +
 
 +
The ADV11-C changes the analog input into digital data. The digital data goes to the A/D data buffer register and waits for a programmed data transfer to the LSI-11 processor or memory, or the ADV11-C puts an interrupt request on the LSI-11 bus and waits for the interrupt request to be acknowledged.
 +
 
 
===Images===
 
===Images===
 
<gallery>
 
<gallery>
Line 6: Line 13:
 
File:A8000-3.jpg|Handle
 
File:A8000-3.jpg|Handle
 
</gallery>
 
</gallery>
 +
 +
===Documentation===
 +
{| class="wikitable"
 +
|[[media:EK-AXV11-UG-002.pdf|EK-AXV11-UG-002]]||LSI-11 Analog System User's Guide
 +
|}

Latest revision as of 16:07, 9 August 2018

ADV11-C Analogue-to-digital converter

The ADV11-C is an LSI-11 analog input printed circuit board, a8000. It accepts up to 16 single-ended inputs, or up to 8 differential inputs, either unipolar or bipolar. A unipolar input can range from 0V to 10V. A bipolar input can range from -10V to +10V. The ADV11-C also has a programmable gain on those inputs of 1, 2, 4 or 8 times the input voltage.

Analog-to-digital (A/D) conversions are started by a program command, an external trigger, or a real-time clock input. When the program command sets the A/D START bit in the control/status register, the ADV11-C starts the A/D conversion on the input channel selected.

The ADV11-C changes the analog input into digital data. The digital data goes to the A/D data buffer register and waits for a programmed data transfer to the LSI-11 processor or memory, or the ADV11-C puts an interrupt request on the LSI-11 bus and waits for the interrupt request to be acknowledged.

Images

Documentation

EK-AXV11-UG-002 LSI-11 Analog System User's Guide