Difference between revisions of "M7941"

From VaxHaven
Jump to navigation Jump to search
(Created page with "==DRV11 Parallel Line Unit== The ADV11-C is an LSI-11 analog input printed circuit board, a8000. It accepts up to 16 single-ended inputs, or up to 8 differential inputs, eith...")
 
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
==DRV11 Parallel Line Unit==
 
==DRV11 Parallel Line Unit==
  
−
The ADV11-C is an LSI-11 analog input printed circuit board, a8000. It accepts up to 16 single-ended inputs, or up to 8 differential inputs, either unipolar or bipolar. A unipolar input can range from 0V to 10V. A bipolar input can range from -10V to +10V. The ADV11-C also has a programmable gain on those inputs of 1, 2, 4 or 8 times the input voltage.
+
The DRV11 is a general-purpose interface unit used for connecting parallel-line TTL or DTL devices to the LSI-11 bus over up to 25 feed of cable. It permits program-controlled data transfers at rates up to 44K words per second (with optimized programming) and provides LSI-11 bus interface and control logic for interrupt processing and vector generation. Data is handled by 16 diode-clamped input lines and 16 latched output lines. Device address is user-assigned and Control/Status Registers (CSR) and Data Registers are compatible with PDP-11 software routines.
−
 
 
−
Analog-to-digital (A/D) conversions are started by a program command, an external trigger, or a real-time clock input. When the program command sets the A/D START bit in the control/status register, the ADV11-C starts the A/D conversion on the input channel selected.
 
−
 
 
−
The ADV11-C changes the analog input into digital data. The digital data goes to the A/D data buffer register and waits for a programmed data transfer to the LSI-11 processor or memory, or the ADV11-C puts an interrupt request on the LSI-11 bus and waits for the interrupt request to be acknowledged.
 
  
 
===Images===
 
===Images===
Line 16: Line 12:
 
===Documentation===
 
===Documentation===
 
{| class="wikitable"
 
{| class="wikitable"
−
|[[media:EK-AXV11-UG-002.pdf|EK-AXV11-UG-002]]||LSI-11 Analog System User's Guide
+
|[[media:EK-ADV11-OP-001.pdf|EK-ADV11-OP-001]]||ADV11-A, KWV11-A, AAV11-A, DRV11 User's Manual
 +
|-
 +
|[[media:EK-ADV11-OP-002.pdf|EK-ADV11-OP-002]]||ADV11-A, KWV11-A, AAV11-A, DRV11 User's Manual
 
|}
 
|}

Latest revision as of 04:50, 11 August 2018

DRV11 Parallel Line Unit

The DRV11 is a general-purpose interface unit used for connecting parallel-line TTL or DTL devices to the LSI-11 bus over up to 25 feed of cable. It permits program-controlled data transfers at rates up to 44K words per second (with optimized programming) and provides LSI-11 bus interface and control logic for interrupt processing and vector generation. Data is handled by 16 diode-clamped input lines and 16 latched output lines. Device address is user-assigned and Control/Status Registers (CSR) and Data Registers are compatible with PDP-11 software routines.

Images

  • Front

  • Back

  • Handle

Documentation

EK-ADV11-OP-001 ADV11-A, KWV11-A, AAV11-A, DRV11 User's Manual
EK-ADV11-OP-002 ADV11-A, KWV11-A, AAV11-A, DRV11 User's Manual
Retrieved from "http://www.vaxhaven.com/?title=M7941&oldid=1952"